Cookie Img
Send Inquiry Send SMS
Home » Products » Telephone and Data Line » Surface Mount

Surface Mount

Surface Mount
Surface Mount
Product Code : CITEL 23
Product Description

With the sheer dedication of our professionals, we are able to manufacture, export and supply our clients a broad array of Surface Mount. This mount device is widely used in construction of electrical circuits. The offered mount is manufactured at our manufacturing unit using optimum quality raw materials with the aid of innovative techniques. Moreover, our honorable clients can avail this Surface Mount at the most reasonable price from us.

Feature:

  • Excellent functionality
  • Compact design
  • Shock proof
  • Easy to install

Details:


Designed to protect Power-Over-Ethernet (POE) (Mode B) network devices with transmission speeds up to 100BaseT. All eight pins are protected by a carefully designed circuit that isolates data from Ethernet power lines. The ultra-sharp clamping response permanently eliminates transients from your POE applications.
Data Line Overview
Introduction

Telecommunication and data transmission devices (PBX, modems, data terminals, sensors, etc...) are increasingly more vulnerable to lightning induced voltage surges. They have become more sensitive, complex and have an increased vulnerabiity to induced surges due to their possible connection across several different networks. These devices are critical to a companies communications and information processing. As such, it is prudent to insure them against these potentially costly and disruptive events. A data line surge protector installed in-line, directly in front of a sensitive piece of equipment will increase their useful life and maintain the continuity of the flow of your information.

Technology of Surge Protectors


All Citel Telephone And Data Line Surge Protectors Are Based On A Reliable Multistage Hybrid Circuit That Combines Heavy Duty Gas Discharge Tubes (Gdts) And Fast Responding Silicon Avalanche Diodes (Sads). This Type Of Circuit Provides,

  •     5kA Nominal Discharge Current (15 times without distruction per IEC 61643)

  •     Less than 1 nanosecond response times

  •     Fail-safe disconnection system

  •     Low capacitance design minimizes signal loss


Parameters for Selecting A Surge Protector

To select the correct surge protector for your installation, keep the following in mind :

  •     Nominal and Maximum Line Voltages

  •     Maximum Line Current

  •     Number of Lines

  •     Data Transmission Speed

  •     Type of Connector (Screw Terminal, RJ, ATT110, QC66)

  •     Mounting (Din Rail, Surface Mount)


Installation

To be effective, the surge protector must be installed in accordance with the following principles.

    The ground point of the surge protectro and of the protected equipment must be bonded.
    The protection is installed at the service entrance of the installation to divert impulse current as soon as possible.
    The surge protector must be installed in close proximity, less than 90 feet or 30 meters) to protected equipment. If this rule cannot be followed, secondary surge protectors must be installed near to the equipment.
    The grounding conductor (between the earth output of the protector and the installation bonding circuit) must be as short as possible (less than 1.5 feet or 0.50 meters) and have a cross sectional area of at least 2.5 mm squared.
    The earth resistance must adhere to the local electrical code. No special earthing is necessary.
    Protected and unprotected cables must be kept well apart to limit coupling.

STANDARDS

Test Standards and installation recommendations for communication line surge prtectors must comply withthe following standards :

    UL497B : Protectors for Data Communications and Fire-Alarm Circuits
    IEC 61643-21 : Tests of Surge Protectors for Communication Lines
    IEC 61643-22 ; Choice/Installation of Surge Protectors for Communication Lines
    NF EN 61643-21 : Tests of Surge Protectors for Communication Lines
    Guide UTE C15-443 : Choice/Installation of Surge Protectors

Special Conditions : Lightning Protection Systems

If the structure to be protected is equipped with a LPS (Lightning Protection System), the surge protectors for telecom or data lines that are installed at the buildings service entrance need to be tested to a direct lightning impulse 10/350us wave form with a minimum surge current of 2.5kA (D1 category test IEC-61643-21).

 

 

 


CITEL Surge Protection Pvt Ltd

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



CITEL Surge Protection Pvt Ltd
A-54, South Extension, Part-II, New Delhi - 110049, India
Mr. Sanjay Chandra (Head of India operation)
Paypal Trust Stamp
Product Showcase
Send Inquiry Send SMS